This wet-rotor pump, often referred to as a magnetic-drive pump by other manufacturers, utilizes an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller. The magnet acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor, thus the term ''wet-rotor''. It is seal-less and oil-less. This pump works well in water garden, statuary and some industrial applications. It is compact in design and is the most energy efficient type of pump Little Giant manufactures. The other side of this efficiency is very little starting torque. Therefore, the pump does not produce as much pressure and will not pump water as high as its epoxy-encapsulated counterpart.
Brand Name: Little Giant
Sub Brand: PES Series
Horsepower: 1/125 HP
Maximum Discharge Flow: 80 gph
Housing Material: Thermoplastic
Pump Switch Type: Switchless Switch
Intake: Bottom
Powered By: AC
Product Type: Statuary Pump
On/Off Operations: Manual
Self Priming: Self-Priming
Hardware Included: No
Corrosion Resistant: Yes
Maximum Feet of Head: 3.5 ft.
Maximum Temperature: 120 °F
Minimum Temperature: 33 °F
Volts: 115 V
Amps: 0.14 amps
Height: 3 in.
Width: 2.8 in.
Depth: 1.9 in.
Discharge Pipe Size: 0.5 in.
Agency Compliance: UL
Warranty: 1 year
Full Load Watts: 8 W
Discharge Type: Barb
Cord Length: 6 ft.
Weight: 1.15 lb.

Little Giant PES Series 1/125 HP 80 gph Thermoplastic Switchless Switch Bottom AC Statuary Pump