The HUS is designed for applications where higher loads are needed. This hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This feature allows for fewer nails, faster installation and the use of all common nails for the same connection.

• Can be installed after the beam is secured in place
• Cannot be modified
• HUS-series hangers are tested, load rated and code compliant
• Seat width: 1-13/16-in
• Actual joist size: 1-3/4-in x 11-1/4-in to 11-7/8-in
• Made from 16-Gauge steel
• Galvanized (G90) for extra corrosion resistance
• Install with 0.162 in. x 3-1/2 in. nails

MiTek THD410 Truss Hanger, 9-1/16 in H, 3 in D, 3-5/8 in W, 3-1/2 in x 9-1/4 to 14 in, Steel, G90 Galvanized